Tikka T3X Lite Bolt-Action Rifle – .270 Winchester Magnum

I had been looking for a good budget rifle and came to the tikka t3x. First of all the gun was made by tikka and they are a very good company. I also liked the crisp trigger and very good bolt. I have not shot the rifle yet but plan to. I recommend this product.

"Second to None", "3 Shot MOA Guarantee"... don't fall for the hype. Picked up a T3x less than 2 weeks ago in 270 Winchester. DNZ Game Reaper and a Vortex Diamondback HP4-16 x42 on top. Torqued, lapped and laser bore sited. Been to the range twice shot 40 rounds each time. First was miscellaneous left over factory Winchester, Federal and Remington 130 grain cartridges. I used them to get the scope close to zero on paper. The second time out I hand loaded a series of 140 grain Nosler Accubond to really bring the scope in for a sub MOA group. - Which did not happen. The net-net is the gun shoots an average of 2 fliers per 5 shots. (See attached pic). I concluded that the barrel is not a full floated barrel when I slide a bill between the barrel and the stock. (See attached picture) the bill stopped 3.5" shy of the action. In reading the "fine print" Tikka goes to great lengths to describe their accuracy testing and the ensuing barrel stamps etc. However, they also go to great length to discourage one from obtaining warranty service with a $70 cover charge to validate a customer's issue. And then go on to state that most accuracy problems they investigate are unfounded, hence the customer eating the $70 plus shipping to Finland and back. They also state that their testing is done on Sako ammunition "house brand". I will take this up with BassPro. Hopefully this is just a fluke and will rectify quickly and easily. Until then, I cannot in good conscience recommend this product to anyone for any reason.

have had this gun for almost 3 years my wife shoots it! only draw back is its lite nd kicks like a mule! I had a mussel break put on it to calm it down and now its not bad at all! haven't had a problem with groups but I always make sure my barrels are not touching the stock and my trigger pull is lite! she likes the gun and I'm happy when she's happy

I have been researching a ton on a couple different rifles over the past 6 months and finally decided on the Tikka, I have no regrets! Though I have not achieved sub M.O.A. yet (I am not the best shot) it has proven to be very accurate, and is pleasant to shoot. Top that with the super smooth bolt, good stock, great reliability, two pound trigger, and Sako barrel you have a heck of a rifle for the price! My only tiny complaint is that the recoil pad isn't great, but nothing a Limbsaver can't help! |BOTTOM LINE| Look if you're like me reading a ton of reviews and researching a ton of stuff maybe it is time to "Pull the Trigger" trust me the Tikka won't let you down!!!

The cons: Stock design produces more recoil than it should. Seems the stock was made for iron sights, and not for a scope. I put a muzzle break on it and it helped out a lot. I free floated the barrel with a Dremel tool. I put a YoDave trigger spring in it and a Limbsaver recoil pad also. Pros: After all of that, and with my reloads, it shoots half MOA with several different bullets. The action is the smoothest I have ever worked for a factory new rifle. I added the beaver tail forearm and forward pistol grip as it is a modular system which is nice. With a harris 6-9 swivel bipod, I am now ready to lay waste to the invading hordes of coyotes that are decimating our deer herds. Depending how the season goes, I might put a different stock on it.

When I looked and saw the reviews, I had to leave my own. I have this rifle in .270 Win. The Tikka T3 IS the best bang for the buck in hunting rifles. It has the smoothest action, best trigger and is one of the most accurate rifles you will shoot out of the box. Mine has been a 1/2 MOA shooter( It loves Federal Fusion 130gr, but the deer don't ) since day one. My recommendations - Install an Ernie's Varmint trigger spring ( less than $10 delivered) for crisp, clean break (I like 2# on my hunting rifles) which is every bit as nice as the Jewell trigger ($269) in my Sendero 7MM Mag. Use the Warne Maxima rings which clamp to the factory dovetail and torque to spec. Mine wasn't free floated either, and it shoots so good I haven't touched it. This is a lightweight rifle. Physics dictates it will have more recoil then a heavier one. To add weight, pull the stock, add lead shot in the webbing and secure it with epoxy, Torque action screws to 35 inch pounds. Do not over torque, it will destroy the plastic stock. If you don't have a Wheeler Fat Wrench, or equivalent, you shouldn't be mounting scopes or touching other screws on a rifle you expect to shoot well. Spend some time and do your own research. If you read enough, you will find the machining tolerances of the actions and chambers on some of the American built rifles I grew up with are not as good as they were years ago when the technology to make it even better is well within their reach. Therefore, I will not spend my money with them. If you ever have performance issues like the reviewer below, on a rifle which is known for accuracy, there is usually a reason. The first thing I do when I take a new rifle out of the box is check the torque on the action screws. Verify proper spec with the manufacturer first. If you haven't done it, do it now and shoot it some more. If that doesn't correct it, try a scope with known performance. I that doesn't correct it, you may have an issue with the rifle itself. I've read hundreds of posts over the years with people on the forums trying to get their new rifle to shoot. Like Tikka said, it's usually not the rifle that's the issue. BORE SIGHTING - Throw that thing away and don't put anything in the barrel except bullets and high quality cleaning equipment. Bore sights can destroy the crown of the barrel. To adjust the scope after mounting, put the rifle on a stable rest and remove the bolt. Look through the bore and find an object about 100 yards away to center in the bore. Turn the scope adjustments to align the reticle on the same spot. Once the reticle is on the same object which is centered in the bore, you will be within 6" (usually closer) of the bull at 100 yards. I love my T3. With the Burris MTAC 4.5-14x42 ($300), it shoots every bit as good as my Sendero 7mm Mag I have over twice as much $$$ in.

Bought the tikka in 30-06 December 2016. First trip to the range sold me on tikka forever. Bolt is super smooth and 1 inch groups were easily accomplished. Its very light and jumps pretty good from a rest, but the recoil pad worked great and shooting offhand, kneeling or sitting made recoil a non issue. All my bolt actions will be tikka from now on.

I bought this gun on sale and still lost money. The first shot on a cold bore is a laser beam. POA/POI every time. After that, it's anyone's guess where the next round will go. I fired: Winchester Power-Point, 150 grain, 2850 fps. Federal Fusion, 130 grain, 3050 fps Hornady American Whitetail, 130 grain, 3060 fps. Hornady Precision Hunter, 145 grain, 2970 fps. Hornady Superformance, 140 grain, 3090 fps. All behaved exactly the same. The first shot is the only reliable shot. Surprisingly, the cheaper ammo grouped a bit tighter than the more expensive stuff. The scope did not get lose and the action is properly torqued. I just don't get it. The gun simply cant handle any heat at all. If I sit 15 minutes between shots, it fires sub MOA. If I don't wait... 3” group... 4” group... So, I guess if I don't pull a bang/flop, then it's going to be a long day. I'm not happy. Now I'm torn between taking a bath and selling it, or maybe start throwing parts at it. This is my first Tikka and it will be my last. P.S. On a positive note, the barrel is free floated, but only on the right hand side (I guess the savings were passed on to me.)

It's a shooter. Just don't get the barrel too hot. My 7 mag likes the 162 ELD-X at 2960 fps. 4 shot groups letting the barrel cool down 5 mins between groups produces less than an MOA groups.

I pick up one recently in .243 Winchester and the action is smooth as silk and the trigger has a good/clean break with a 3.5lbs trigger pull.The only complaint is that the magazine is a bit chintzy, with rounds occasionally get stuck in the magazine.

First gun I’ve bought. Love the weight, the feel, and accuracy. Everyone kept pointing me to a Tikka cause they have a legit SUB MoA accuracy... and they do! Took it to the range yesterday and shot 1/4”-1/2” groupings at 100yrds. Using 30.06 with Federal and Winchester. It does have a nice kick to it but it’s manageable (only reason I gave it a 4/5 stars)

I own three Tikka rifles, two for several years now. I have a .223, .270 and .308. All three are excellent shooters and capable of sub MOA groups with a good shooter and the correct ammo. I have owned many rifles over the years, but this has become my go to when purchasing a new caliber. I’m sorry for those who have issues, I would definitely send your rifle in for warranty/repair. These are excellent rifles, but I’m sure they can throw a lemon now and then. I’ve had nothing but good experience with my Tikka rifles!

Haven't shot it yet but impressed by the design. Looking to mount glass and then shoot. Action is smooth.

Took my first deer with this rifle in 6.5 CM from a stand at close to 90 yards with a hand loaded 140 grain Accubond. Deer ran about 10 feet before dropping. Shot through both lungs and nipped the top of the heart. Through and through. This rifle placed the bullet exactly where I aimed it. It’s extremely accurate and, as expected, has low recoil. Just a great value that delivers well above its price. Get one and never be disappointed.

I have owned my tika t3 in 7mm mag for over 10 yrs I got one of the originals made by Sako in Finland it has been the Smoothest Best Tac driving riffle I have ever owned! Set it for 200 yards & forget it I havent had to touch the scope since! Always on the money first shot Any shot! My Son would laugh if he saw me bring it out Hunting sayin O you getting serious today something is going down Because I Never miss with it ! Cant go wrong !

I originally bought this rifle for my son. Then I found it to be my go to hunting rifle for bear and deer. Really accurate and smooth rifle!

Tikka's are great rifles; the bolt is buttery smooth and mine shoots consistently under 1 MOA with Hornady Precision Hunter. This is a light rifle and I preemptively replaced the original with a Limbsaver recoil pad (even though the T3x pad was upgraded over the T3). I mounted an Arken scope and found the rifle pleasant to shoot. This is a solid rifle and I am glad I made the purchase. Price was average for the market I searched. Great value for the money IMHO.